ALT Linux repositórios
| S: | 3.14.14-alt3 |
| 5.0: | 3.14.4-alt5 |
| 4.1: | 3.14.8-alt0.M41.1 |
| 4.0: | 3.14.3-alt0.M40.1 |
| 3.0: | 3.10.17-alt1 |
| +updates: | 3.10.18-alt0.C30.1 |
Outros repositórios
| Upstream: | 3.14.3 |
Group :: Sistema/Servidores
RPM: apcupsd
Navegação
Main Changelog Spec Patches Sources Download Gear Bugs e FR Repocop
27 julho 2023 Artyom Bystrov <arbars at altlinux.org> 3.14.14-alt3
- Reworking fix with autoconf (tnx to glebfm@)
- Use autoconf_2.60
- New version
- New version (added MODBUS USB support)
- added TIMELEFT to some short messages
- removed old (unrecognized) configure's options:
enable-powerflute, enable-pthreads, enable-nls,
enable-master-slave, with-css-dir
- New version
- converted README.ALT to UTF8
- added possibility to set options through sysconfig/apcupsd
- Fixed write to eeprom by apctest (based on apcupsd's SVN [r2097])
- Fix issue with net driver not reporting MODEL (apcupsd's SVN [r2068])
- apcsmart port reopen when COMMLOST (apcupsd's SVN [r2096])
- New version (with MODBUS support)
- Fixed typo in platforms/altlinux/apcupsd.in
- Some improvements in script "upsdmessages"
- New version
- New version
- Removed "Conflicts: nut" (ALT #25462)
- Swapped DD/MM to MM/DD in apctest's messages
- Do not package hal policy
- Removed unused patches from spec
- New version (battery calibration supported via USB now)
- Changed xorg-x11-devel to libX11-devel in BuildRequires
- Removed %__ macroses
- New version
- Changed permissions for binary files and init script (ALT #20338)
- New version
- Fixed building with glibc 2.10 (mhlavink@redhat)
- New version
- Changed "init.d/apcupsd status" behaviour (call status instead of apcaccess)
- Added lsb init header
- Added BuildArch: noarch for doc package
- Static build with libnet-snmp due to running after file systems unmount
- Fixed in get_killpower_delay
added -i to egrep call (models can be Smart-UPS and SMART-UPS)
a lead zero is removed in output
- Added README.ALT.koi8-r
- New version (powerflute is removed, see changelog)
- Fixed in init script:
killpower is applied at "service stop" if shutdown initiated by power failure
(sometime it is impossible when file systems unmounted)
script is called before network stop when shutdown (communications
with UPS can be established via snmp)
- New version
- Change: rebuild with --enable-snmp
- Fix: build with autoconf_2.60 (export ac_cv_path_SHUTDOWN=/sbin/shutdown)
- New version
- New version
- New version
If you use the old style master/slave networking mode, be sure to read the release notes.
- New version
- Fix: #9925 (--enable-net)
- New version
- Fix: #9627 (wrong mandir)
- New version
- New version
- Change: compiled with "--enable-master-slave"
- New version, return from absoleted
- Fix: add ghost powerfail and nologin to %files in spec
- Fix: conflict with nut package
- New: change action scripts
- New: add apctest to package
- New: move doc to apcupsd-doc package
- Change: Disable usb_killpower.patch and daemonize.patch (fixed in mainstream)
- Change: Split alt-specific.patch to platforms-altlinux.tgz and alt-specific-configure.in.patch
- Change: Disable calling of autoheader (not work with new source)
- Change: new format for init script
- Updated to 3.10.5.
- Dropped old patch for gcc3 support.
- Updated alt-specific patch.
- Built --with-nisip=127.0.0.1 (previously set by the patch).
- Patch to fix killpower for USB UPSes (apcupsd part; the kernel fix is
also needed to make killpower work). - Patch from CVS to daemonize properly (previously stdin was not closed).
- Fixed scripts (broken in 3.10.1-alt1).
- Specfile cleanup.
- Built --with-lock-dir=%_lockdir/serial.
- Additional convention enforcement on patch file names.
- Disabled cgi subpackage (unclean build).
- Updated to 3.10.1
- Fixed build with gcc3
- Enabled usb support
- Moved web stuff to separate subpackage.
- 3.8.2
- Moved important binaries from /usr/sbin to /sbin.
- RE adaptions (a lot).
- new version
- %postun => %preun
- automatically added BuildRequires
- first mandrake version