extension = mmcache.so

;	Since the version 2.3.15, Turck MMCache is compatible with Zend Optimizer's
;	loader. Zend Optimizer must be installed after Turck MMCache in php.ini.
;	If you don't use scripts encoded with Zend Encoder then don't install
;	Zend Optimizer, because it dose significant performance slowdown.

;	zend_extension="/usr/lib/php4/mmcache.so"

[mmcache]

mmcache.admin.name=
mmcache.admin.password=

mmcache.shm_size = "16"
;	The amount of shared memory (in megabytes) that Turck MMCache will use.
;	"0" means OS default. Default value is "0".

mmcache.cache_dir = "/var/cache/php-mmcache"
;	The directory that is used for disk cache. Turck MMCache stores precompiled
;	code, session data, content and user entries  here. The same data can be
;	stored in shared memory also (for more quick access). Default value is
;	"/tmp/mmcache".

mmcache.enable = "1"
;	Enables or disables Turck MMCache. Should be "1" for enabling or
;	"0" for disabling. Default value is "1".

mmcache.optimizer = "0"
;	Enables or disables internal peephole optimizer which may speed up code
;	execution. Should be "1" for enabling or "0" for disabling.
;	Default value is "1".

mmcache.debug = "0"
;	Enables or disables debug logging. Should be "1" for enabling or
;	"0" for disabling. Default value is "0".

mmcache.check_mtime = "1"
;	Enables or disables PHP file modification checking. Should be "1"
;	for enabling or "0" for disabling. You should set it to "1" if you want
;	to recompile PHP files after modification. Default value is "1".

mmcache.filter = ""
;	Determine which PHP files must be cached. You may specify the number of
;	patterns (for example "*.php *.phtml") which specifies to cache or
;	not to cache. If pattern starts with the character "!", it means to ignore
;	files which are matched by the following pattern. Default value is "" that
;	means - all PHP scripts will be cached.

mmcache.shm_max = "0"
;	Disables putting large values into shared memory by "mmcache_put()"
;	function.
;	It indicates the largest allowed size in bytes (10240, 10K, 1M). The "0"
;	disables the limit. Default value is "0".

mmcache.shm_ttl = "0"
;	When MMCache fails to get shared memory for new script it removes all
;	scripts which were not accessed at last "shm_ttl" seconds from shared
;	memory. Default value is "0" that means - don't remove any files from
;	shared memory.

mmcache.shm_prune_period = "0"
;	When MMCache fails to get shared memory for new script it tryes to remove
;	old script if the previous try was made more then "shm_prune_period"
;	seconds ago. Default value is "0" that means - don't try to remove any
;	files from shared memory.

mmcache.shm_only = "0"
;	Enables or disables caching of compiled scripts on disk. It has no effect
;	on session data and content caching (they are always cached on disk). 
;	Default value is "0" that means - use disk and shared memory for caching.

mmcache.compress = "0"
;	Enables or disables cached content compression. Default value is "1" that
;	means enable compression.