sample/auth-down | 17 +++++ sample/auth-up | 17 +++++ sample/callback-client | 9 +++ sample/callback-server | 10 +++ sample/callback-users | 10 +++ sample/ip-down | 22 +++++++ sample/ip-up | 23 +++++++ sample/options | 153 ++++++++++++++++++++++++++++++++++++++++++++++++ sample/options.ttyXX | 14 +++++ sample/pap-secrets | 28 +++++++++ 10 files changed, 303 insertions(+), 0 deletions(-) diff --git a/sample/auth-down b/sample/auth-down new file mode 100755 index 0000000..edde65d --- /dev/null +++ b/sample/auth-down @@ -0,0 +1,17 @@ +#!/bin/sh +# +# A program or script which is executed after the remote system +# successfully authenticates itself. It is executed with the parameters +# +# + +# +# The environment is cleared before executing this script +# so the path must be reset +# +PATH=/usr/sbin:/sbin:/usr/bin:/bin +export PATH + +echo auth-down `date +'%y/%m/%d %T'` $* >> /var/log/pppstats + +# last line diff --git a/sample/auth-up b/sample/auth-up new file mode 100755 index 0000000..54722a3 --- /dev/null +++ b/sample/auth-up @@ -0,0 +1,17 @@ +#!/bin/sh +# +# A program or script which is executed after the remote system +# successfully authenticates itself. It is executed with the parameters +# +# + +# +# The environment is cleared before executing this script +# so the path must be reset +# +PATH=/usr/sbin:/sbin:/usr/bin:/bin +export PATH + +echo auth-up `date +'%y/%m/%d %T'` $* >> /var/log/pppstats + +# last line diff --git a/sample/callback-client b/sample/callback-client new file mode 100755 index 0000000..5b75612 --- /dev/null +++ b/sample/callback-client @@ -0,0 +1,9 @@ +#!/bin/sh +# Script callback-client +# Script parameters: delay time in seconds + +DELAY="$1" + +/usr/sbin/chat -v -t 2 "" \d+++\d\c OK ATH0 OK +sleep $DELAY +/usr/sbin/chat -v "" ATZ OK "" RING ATA CONNECT diff --git a/sample/callback-server b/sample/callback-server new file mode 100755 index 0000000..ac5bc54 --- /dev/null +++ b/sample/callback-server @@ -0,0 +1,10 @@ +#!/bin/sh +# Script callback-server +# Script parameters: delay time in seconds, callback number + +DELAY="$1" +NUMBER="$2" + +/usr/sbin/chat -v -t 2 "" \d+++\d\c OK ATH0 OK +sleep $DELAY +/usr/sbin/chat -v "" ATZ OK ATD$NUMBER CONNECT diff --git a/sample/callback-users b/sample/callback-users new file mode 100755 index 0000000..28afd4b --- /dev/null +++ b/sample/callback-users @@ -0,0 +1,10 @@ +# User list for callback +# Username option +# option - no callback +# option * or empty user definied +# option other admin definied: this number +# in username * and ? wildcars valid, callback uses the best fit +# Examples: +# zotyo 67435 # user zotyo admin definied, number 67453 +# gates - # gates not called back +* diff --git a/sample/ip-down b/sample/ip-down new file mode 100755 index 0000000..b771fb6 --- /dev/null +++ b/sample/ip-down @@ -0,0 +1,22 @@ +#!/bin/sh +# +# This script is run by the pppd _after_ the link is brought down. +# It should be used to delete routes, unset IP addresses etc. +# +# This script is called with the following arguments: +# Arg Name Example +# $1 Interface name ppp0 +# $2 The tty ttyS1 +# $3 The link speed 38400 +# $4 Local IP number 12.34.56.78 +# $5 Peer IP number 12.34.56.99 +# + +# +# The environment is cleared before executing this script +# so the path must be reset +# +PATH=/usr/sbin:/sbin:/usr/bin:/bin +export PATH + +# last line diff --git a/sample/ip-up b/sample/ip-up new file mode 100755 index 0000000..02bb71c --- /dev/null +++ b/sample/ip-up @@ -0,0 +1,23 @@ +#!/bin/sh +# +# This script is run by the pppd after the link is established. +# It should be used to add routes, set IP address, run the mailq +# etc. +# +# This script is called with the following arguments: +# Arg Name Example +# $1 Interface name ppp0 +# $2 The tty ttyS1 +# $3 The link speed 38400 +# $4 Local IP number 12.34.56.78 +# $5 Peer IP number 12.34.56.99 +# + +# +# The environment is cleared before executing this script +# so the path must be reset +# +PATH=/usr/sbin:/sbin:/usr/bin:/bin +export PATH + +# last line diff --git a/sample/options b/sample/options new file mode 100644 index 0000000..8d0a3f9 --- /dev/null +++ b/sample/options @@ -0,0 +1,153 @@ +# /etc/ppp/options + +# The name of this server. Often, the FQDN is used here. +#name + +# Enforce the use of the hostname as the name of the local system for +# authentication purposes (overrides the name option). +usehostname + +# If no local IP address is given, pppd will use the first IP address +# that belongs to the local hostname. If "noipdefault" is given, this +# is disabled and the peer will have to supply an IP address. +noipdefault + +# With this option, pppd will accept the peer's idea of our local IP +# address, even if the local IP address was specified in an option. +#ipcp-accept-local + +# With this option, pppd will accept the peer's idea of its (remote) IP +# address, even if the remote IP address was specified in an option. +#ipcp-accept-remote + +# Specify which DNS Servers the incoming Win95 or WinNT Connection should use +# Two Servers can be remotely configured +#ms-dns 192.168.1.1 +#ms-dns 192.168.1.2 + +# Specify which WINS Servers the incoming connection Win95 or WinNT should use +#wins-addr 192.168.1.50 +#wins-addr 192.168.1.51 + +# enable this on a server that already has a permanent default route +#nodefaultroute + +# Run the executable or shell command specified after pppd has terminated +# the link. This script could, for example, issue commands to the modem +# to cause it to hang up if hardware modem control signals were not +# available. +# If mgetty is running, it will reset the modem anyway. So there is no need +# to do it here. +#disconnect "chat -- \d+++\d\c OK ath0 OK" + +# Increase debugging level (same as -d). The debug output is written +# to syslog LOG_LOCAL2. +debug + +# Enable debugging code in the kernel-level PPP driver. The argument n +# is a number which is the sum of the following values: 1 to enable +# general debug messages, 2 to request that the contents of received +# packets be printed, and 4 to request that the contents of transmitted +# packets be printed. +#kdebug n + +# Require the peer to authenticate itself before allowing network +# packets to be sent or received. +# Please do not disable this setting. It is expected to be standard in +# future releases of pppd. Use the call option (see manpage) to disable +# authentication for specific peers. +#auth + +# authentication can either be pap or chap. As most people only want to +# use pap, you can also disable chap: +#require-pap +#refuse-chap + +# Use hardware flow control (i.e. RTS/CTS) to control the flow of data +# on the serial port. +crtscts + +# Specifies that pppd should use a UUCP-style lock on the serial device +# to ensure exclusive access to the device. +lock + +# Use the modem control lines. +modem + +# async character map -- 32-bit hex; each bit is a character +# that needs to be escaped for pppd to receive it. 0x00000001 +# represents '\x01', and 0x80000000 represents '\x1f'. +# To allow pppd to work over a rlogin/telnet connection, ou should escape +# XON (^Q), XOFF (^S) and ^]: (The peer should use "escape ff".) +#asyncmap 200a0000 +asyncmap 0 + +# Specifies that certain characters should be escaped on transmission +# (regardless of whether the peer requests them to be escaped with its +# async control character map). The characters to be escaped are +# specified as a list of hex numbers separated by commas. Note that +# almost any character can be specified for the escape option, unlike +# the asyncmap option which only allows control characters to be +# specified. The characters which may not be escaped are those with hex +# values 0x20 - 0x3f or 0x5e. +#escape 11,13,ff + +# Set the MRU [Maximum Receive Unit] value to for negotiation. pppd +# will ask the peer to send packets of no more than bytes. The +# minimum MRU value is 128. The default MRU value is 1500. A value of +# 296 is recommended for slow links (40 bytes for TCP/IP header + 256 +# bytes of data). +#mru 542 + +# Set the MTU [Maximum Transmit Unit] value to . Unless the peer +# requests a smaller value via MRU negotiation, pppd will request that +# the kernel networking code send data packets of no more than n bytes +# through the PPP network interface. +#mtu + +# Set the interface netmask to , a 32 bit netmask in "decimal dot" +# notation (e.g. 255.255.255.0). +#netmask 255.255.255.0 + +# Don't fork to become a background process (otherwise pppd will do so +# if a serial device is specified). +nodetach + +# Set the assumed name of the remote system for authentication purposes +# to . +#remotename + +# Add an entry to this system's ARP [Address Resolution Protocol] +# table with the IP address of the peer and the Ethernet address of this +# system. {proxyarp,noproxyarp} +proxyarp + +# Use the system password database for authenticating the peer using +# PAP. Note: mgetty already provides this option. If this is specified +# then dialin from users using a script under Linux to fire up ppp wont work. +#login + +# If this option is given, pppd will send an LCP echo-request frame to +# the peer every n seconds. Under Linux, the echo-request is sent when +# no packets have been received from the peer for n seconds. Normally +# the peer should respond to the echo-request by sending an echo-reply. +# This option can be used with the lcp-echo-failure option to detect +# that the peer is no longer connected. +lcp-echo-interval 30 + +# If this option is given, pppd will presume the peer to be dead if n +# LCP echo-requests are sent without receiving a valid LCP echo-reply. +# If this happens, pppd will terminate the connection. Use of this +# option requires a non-zero value for the lcp-echo-interval parameter. +# This option can be used to enable pppd to terminate after the physical +# connection has been broken (e.g., the modem has hung up) in +# situations where no hardware modem control lines are available. +lcp-echo-failure 4 + +# Specifies that pppd should disconnect if the link is idle for n seconds. +idle 600 + +# Disable the IPXCP and IPX protocols. +noipx + +# ------ diff --git a/sample/options.ttyXX b/sample/options.ttyXX new file mode 100644 index 0000000..d4202f5 --- /dev/null +++ b/sample/options.ttyXX @@ -0,0 +1,14 @@ +# If you need to set up multiple serial lines then copy this file to +# options. for each tty with a modem on it. +# +# The options.tty file will assign an IP address to each PPP connection +# as it comes up. They must all be distinct! +# +# Example: +# options.ttyS1 for com2 under DOS. +# +# Edit the following line so that the first IP address +# mentioned is the ip address of the serial port while the second +# is the IP address of your host +# +hostname-s1:hostname diff --git a/sample/pap-secrets b/sample/pap-secrets new file mode 100644 index 0000000..098971b --- /dev/null +++ b/sample/pap-secrets @@ -0,0 +1,28 @@ +# Secrets for authentication using PAP +# client server secret IP addresses + +# OUTBOUND CONNECTIONS +# Here you should add your userid password to connect to your providers via +# pap. The * means that the password is to be used for ANY host you connect +# to. Thus you do not have to worry about the foreign machine name. Just +# replace password with your password. +# If you have different providers with different passwords then you better +# remove the following line. +#hostname * password + +# INBOUND CONNECTIONS +#client hostname 192.168.1.1 + +# If you add "auth login -chap +pap" to /etc/mgetty+sendfax/login.config, +# all users in /etc/passwd can use their password for pap-authentication. +# +# Every regular user can use PPP and has to use passwords from /etc/passwd +#* hostname "" +# UserIDs that cannot use PPP at all. Check your /etc/passwd and add any +# other accounts that should not be able to use pppd! Replace hostname +# with your local hostname. +#guest hostname "*" - +#master hostname "*" - +#root hostname "*" - +#support hostname "*" - +#stats hostname "*" -