[Unit] Description=tgtd iSCSI target daemon After=network.target [Service] EnvironmentFile=/etc/sysconfig/tgtd ExecStart=/usr/sbin/tgtd -f $TGTD_OPTS # Put tgtd into "offline" state until all the targets are configured. # We don't want initiators to (re)connect and fail the connection # if it's not ready. ExecStartPost=/usr/sbin/tgtadm --op update --mode sys --name State -v offline # Configure the targets. ExecStartPost=/usr/sbin/tgt-admin -e -c $TGTD_CONFIG # Put tgtd into "ready" state. ExecStartPost=/usr/sbin/tgtadm --op update --mode sys --name State -v ready # Update configuration for targets. Only targets which # are not in use will be updated. ExecReload=/usr/sbin/tgt-admin --update ALL -c $TGTD_CONFIG # NOTE: Shutdown of the iscsi target may cause data corruption # for initiators that are connected. ExecStop=/usr/sbin/tgtadm --op update --mode sys --name State -v offline # Remove all targets. It only removes targets which are not in use. ExecStop=/usr/sbin/tgt-admin --update ALL -c /dev/null # tgtd will exit if all targets were removed ExecStop=/usr/sbin/tgtadm --op delete --mode system [Install] WantedBy=multi-user.target