Group :: System/Kernel and hardware
RPM: stm32flash
Main Changelog Spec Patches Sources Download Gear Bugs and FR Repocop
Current version: 0.7-alt1
Build date: 8 march 2023, 02:07 ( 55.3 weeks ago )
Size: 254.75 Kb
Home page: https://sourceforge.net/projects/stm32flash
License: GPLv2+
Summary: Flash Program for the STM32 Bootloader
Description:
List of contributors List of rpms provided by this srpm:
ACL:
Build date: 8 march 2023, 02:07 ( 55.3 weeks ago )
Size: 254.75 Kb
Home page: https://sourceforge.net/projects/stm32flash
License: GPLv2+
Summary: Flash Program for the STM32 Bootloader
Description:
Open source flash program for the STM32 ARM processors using the ST
serial bootloader over UART or I2C.
Features:
- UART and I2C transports supported
- device identification
- write to flash/ram
- read from flash/ram
- auto-detect Intel HEX or raw binary input format with option to force
binary
- flash from binary file
- save flash to binary file
- verify & retry up to N times on failed writes
- start execution at specified address
- software reset the device when finished if -R is specified
- resume already initialized connection (for when reset fails, UART only)
- GPIO signalling to enter bootloader mode (hardware dependent)
Current maintainer: Anton Midyukov (maintainer) serial bootloader over UART or I2C.
Features:
- UART and I2C transports supported
- device identification
- write to flash/ram
- read from flash/ram
- auto-detect Intel HEX or raw binary input format with option to force
binary
- flash from binary file
- save flash to binary file
- verify & retry up to N times on failed writes
- start execution at specified address
- software reset the device when finished if -R is specified
- resume already initialized connection (for when reset fails, UART only)
- GPIO signalling to enter bootloader mode (hardware dependent)
List of contributors List of rpms provided by this srpm:
- stm32flash
- stm32flash-debuginfo