ALT Linux repositórios
Group :: Sistema/Configurações/Rede
RPM: alterator-net-pptp
Main Changelog Spec Patches Sources Download Gear Bugs e FR Repocop
11 julho 2019 Andrey Cherepanov <cas at altlinux.org> 0.10.5-alt1
- Use hostname-or-ip field type to support IP address (ALT #37010).
- NMU: Replace BuildRequires for guile on e2k arch.
- Use typed parameters (closes: #33657).
- Build with guile2.0.
- add maxfail, holdoff, lcp-echo-interval, lcp-echo-failure options
- implemented --clamp-mss-to-pmtu autosetup (closes: #26124)
+ should help when a remote host pings and works ok from gateway
setup using this module but a workstation behind it will ping
that remote host but timeout on e.g. http due to oversized packets
+ you might need to explicitly enable /etc/net firewall by adding
CONFIG_FW=yes to /etc/net/ifaces/default/options; if that's ever
needed, please amend http://bugzilla.altlinux.org/26124
- disabled Van Jacobson compression by default (reported symptom:
ICMP ping would work just fine, while HTTP HEAD would get stuck;
forward port of 0.5.10-alt1) - updated Packager:
- added an Url:
- use setsid for ifup comand.
- disable UI if connections do not exist (closes: #21693).
- join callbacks for qt and html.
- improve connection start (by inger@)
- qt ui: add margin
- backend: replace own start/stop functions with standard from alterator-net-functions
- use modern form library, ajax interface and alterator-net-functions
- move translations and help to alterator-l10n
- merge with inger
- use help from l10n
- minor module update
- backend: don't work with empty names
- add DOCTYPE to html template
- remove title and h1 from html template
- replace constraints with types
- use write_debug from alterator-sh-functions
- move most functions to alterator-net-common
- join to common translation database
- use alterator-sh-functions
- rewrite UI
- add "usepeerdns" by default into pppoptions (#14116)
- "kludgy krap" release
- hacked to allow PPTP-over-PPP:
+ start PPTP interface numbering with "ppp1"
+ if ppp0 is active (via dialer, not etcnet) on module startup,
append it to interface list
+ don't try to REQUIRE dynamic interface like that either
- mtu: 1460->1400 (Alexey Novikov reported that his connection
seems to have required 1432)
- clamp mtu to 1460 on interfaces being created: ISP or link
related issues might sort of mandate this (in case of
"lost or reordered" GRE packets you might try to lower it
to 1400 as WinXP would do by default);
thanks Sergey Vlasov (vsu@) for insightful advice;
see also #14730
- Change help paths to the new style.
- rebuild
- don't attempt to start interface upon "Apply" button unless
it's marked to start at boot (probably shouldn't start at all,
there are Start/Stop buttons now and currently the module sorta
hangs if unable to connect)
- applied patch by Konstantin Uvarin (lodin@) to move password
from chap-secrets which is shared by all connections into
interface-specific pppoptions (#14649)
- add "nodeflate" and "nobsdcomp" options to created PPP interfaces
since these compression types are unsupported on Windows(TM) and
hence have better chance to be untested/broken on server-side;
thanks Sergey Vlasov (vsu@) for a note
- disable buttons and inputs that are useless
(e.g. when no connection is configured) (#14026) - retry ifup/ifdown 3 times, not 5
- fixed subtle thinko in start_iface() -- which wouldn't trigger
any problems in that particular script but did manifest later - added "Start" and "Stop" buttons to directly manipulate the
connection status - updated strings/translations
- first strike at routing issues (#13966): this version will setup
an additional static route to VPN gateway via current defult gw
(not exactly ideal but this seems to be done properly in etcnet) - added onboot and persist controls (another part of #11988)
- updated strings and translations
- somewhat tested
- added MPPE checkbox (partial fix for #11988)
- s/throw/through/ (#13336)
- s/net-pppoe/net-pptp/
- uk.po update
- use alterator-net-common common library
- add desktop file
- rebuild with latest standalone
- add interface status info
- switch to new card-index scripts
- update Ukrainian translation
- little CSS optimizations
- remove config-*
- add Ukrainian translation
- help improvements from kirill@
- improve po template generation
- add documentation
- assign 'Network' group
- more translations
- use gridbox
- use ifup/ifdown instead of whole network restart
- enable auto-select
- simplify backend
- fix ethernet interface listing
- add fbi data
- fix constraints for server name (bug #10780)
- require gettext
- add label constraints
- fix backend (read on /)
- move "first available interface" logic from UI to backend
- list all available eth interfaces itself
- add constraints visualization
- add translations
- enable constraints
- use native message boxes
- initial release