Group :: System/Configuration/Other
RPM: alterator-lilo
Main Changelog Spec Patches Sources Download Gear Bugs and FR Repocop
7 february 2019 Vladislav Zavjalov <slazav at altlinux.org> 1.9-alt2
- fix build (add missing header sys/sysmacros.h, add ExclusiveArch), closes #36021
- dropped evms kludges for good, these aren't needed anymore
with installer-scripts-remount-stage2 (and spoiled UEFI case
even if proper support means elilo); see also #28181
- "udevadm trigger" into backend3 script call disable for prevent Video-XOrg
crash for mostly ATI Radeon and old NVidia.
- rebuild with new libdevmapper versioning
- quiet* added to list of options got from /proc/cmdline
- set 1 second wait by default if there is only one system
- lilo-other-system.sh/add_kernels():
- avoid non-zero return value
- fix regexp
- backend: add all installed kernels to new lilo.conf
- qt ui: fix type checking in (round-timeout t)
- update alterator-lc-functions; add tests for it
- backend: protect boot= parameter if user don't want to install
bootloader (closes: #18679)
- lilo-disk.sh/find_others(): don't look for windows on extended
partitions with 0xf type
- little ui improvements
- remove some unused code from backend
- NMU: offer mdX if root is on software raid
conflict between device name and boot parameter format, forbidden ':' symbol in device name
(regression, was #17613)
- NMU: fix raid install
- lilo-disk.sh: fix get_part_with_mntpt to find correct
devices by uuid (closes: #20634)
- fix adding -b parameter
- localize some messages from lilo
- lilo-disk.sh: don't show unexisting mountpoints
- helpers/lilo-{parser,raid-boot}.sh: Fixed raidboot (closes: #20469).
- fix root device search in installer
- fix evms_protection()
- use /mnt/destination/etc/fstab in installer's environment
- lilo-disk.sh: use /etc/fstab instead of /proc/mounts for
finding device mountpoints - lilo-conf.sh: use "UUID=..." instead of "/dev/disk/by-uuid/..."
for root parameter (closes: #20292) - avoid more error messages
- avoid error messages about broken pipes
- add step file
- backend: add udevadm trigger/settle on startup
- allow using in installer's stage2
- add LILO_LITE, LILO_STAGE2 controls
- use alterator-hw-functions
- fix lilo-disk.sh helper
- fix lilo-disk.sh helper
- fix lilo-disk.sh helper
- fix get_part_with_mntpt() for lvm partitions
- don't show empty bootloader place
- add list_bootloader_places() instead of
list_hard_drives() + get_boot_part() - change bootloader places list (fix qemu installation)
- get_part_with_mntpt: use ID_FS_USAGE from evms device
- fix typo in get_part_with_mntpt() (by mithraen@)
- fix get_part_with_mntpt()
- lilo-disk.sh helper: fix disk sizes and root device
- HAL-free version. Use udevadm+sysfs+sfdisk+lilo to collect system information.
- Search for default place for bootloader in bios.
- fix translation in desktop-file
- use translations and help from alterator-l10n
- helpers/lilo-hal.sh: fix problem with volumes which can not be found by hal (lvm)
- fix helpers/lilo-parser.sh
- fix expert UI
- add master-boot settins for autodetected Windows sections
- replace expert boot-as setting by master-boot
- fix alignements in expert UI
- fix expert UI
- remove po-domain from backend
- don't install help
- use help from alterator-l10n
- rewrite expert UI
- show apply and reset buttons in edit lilo.conf UI in installer
- some tests on new sections in lilo-parser.sh
- lilo testing dryrun with real command line options
- fix read dev action in backend
- use -efu in backend
- fix helpers/lilo-conf.sh
- broken evms workaround (install bootloader to evms device)
- rebuild with new alterator-l10n
- don't convert boot dev to UUID=... on lilo.conf writing
- protect current boot device from being lost by simple interface
- move write_enum_item functions from helpers to backend
- remove update_menus from spec (thanks to repocop)
- update help
- fix backend for working with devices with - in names
- fix lilo-other-system.sh
- 2 digits after point in disk sizes
- fix problem with translation of other systems labels
- fix template lilo.conf
- hack get_part_with_mntpt for raid+evms
- fix bootable flags setting
- fix raid capabilities
- fix label for failsafe section
- rewrite lilo-bootable-flag.sh
- show raids as partitions, not as disks
- get_default_boot_dev returns raidboot if it exists
- debug -> verbose in lilo-fix-cdrom.sh
- fix error with labels for other systems
- move dev2sym tests from lilo-hal to dev2sym
- sort partitions numerically
- change hal property info.product to storage.model in disk labels
- skip raid members in partition list
- fix labels for other systems
- prevent default boot disk to be removable
- write globals when change mode from the expert one
- ui/lilo/index.scm: remove nested (woo-catch/message
- protect device names by symlinks /dev/disks/by-id/*
- misc fixes
- skip removables in disk list
- fix error with leading zeros in arithmetics (we dont want oct values!)
- remove (with-translation), remove implicit attribute in (label)
- fix makefile - 2
- fix makefile
- rebuild with new alterator-l10n
- tune ui
- rebuild with alterator-l10n
- turn backend debug messages off
- change label in desktop-file (Bootloader (lilo) -> Bootloader)
- fix helpers/lilo-hal.sh (mountpoints)
- fix helpers/lilo-hal.sh (hal does not understand devices /dev/evms/sda1)
- fix helpers/lilo-hal.sh (hal can't get mount_point in installer's chroot...)
- fix helpers/lilo-hal.sh
- remove woo-write/constraints
- fix helpers/lilo-hal.sh
- install tests
- fix helpers/lilo-hal.sh
- use hal
- show /boot partition name in simple interface "Linux partition (hda5)"
- fix work with new enumref (explicitly print label)
- improve timeout round function
- improve help (cas@)
- if install=="text" remove message parameter,
else message=/boot/splash/message (fix #16217)
- use decimal point from LC_NUMERIC in hard drive labels
- fix labels
- rebuild with new alterator-l10n
- add some controls in simple mode
- rebuild
- fix bug with confonly setting in expert mode
- change labels for interface types
- add commiting lilo.conf in expert mode interface (fix #16162)
- fix adding default current device
- fix translations for disk sizes
- add default current device
- add translations for disk sizes (Gb/Mb/Kb)
- remove help message from installer
- remove bootable flag check in other system search
- change label for other OS (partition types: 81|83|85|88|8e|f0|fd) Other->Linux
- add other sections to simple-mode interface
- simple interface with radiobuttons only
- fix parameters with "-" (raid-extra-boot, read-only and others)
- Interface: new simple mode + expert mode from 0.4-alt13 + edit-source
- use install-module rule, remove translation from desktop file
- remove expert mode interface
- new simple mode interface
- rewrite backend output to fit alterator_api_version=1
- rewrite read action in backend
- remove constrains action
- use alterator_api_version=1
Requires: alterator-sh-functions >= 0.3-alt4
- remove in_part usage from backend
- rearrange expert interface to fit to installer
- add "don't install bootloader" checkbox to "edit lilo.conf" dialog"
- use enumrefs
- remove pot-file
- rearrange expert interface to fit it to 800x600
- rebuild with new alterator-l10n
- remove "map" parameter writing from backend.
(fix bug with bad lilo.conf with map="")
- rewrite new/update-section functions
fix problem with modifying existing sections - modify write_params to write empty values!
- simplification of "edit lilo.conf" dialog
- fix bug with duplication of global "append" parameter
(use /proc/cmdline params only when lilo.conf is initially created)
- fix append/addappend confusion in section parameters
- change parameter boot-as -> boot_as for use with new alterator-sh-functions
- join extra-global and extra-sections interfaces
- fix labels
- remove "skip bootloader installation" checkbox
- remove duplicated "Set Default" button
- remove alterator-autoinstall usage
- fix package dependencies
- remove po files
- change labels in QT UI
- fix bug with "skip bootloader" checkbox
- use quote_sed_regexp() and quote_shell() from libshell
- use ui/*/index.scm catalog structure
- fix qt ui
- fix labels
- move ":" back to (_ )
- simple_quote -> string_quote, error -> write_error in backend
- use alterator-l10n
- change label "Install" (menu/text) to "Interface"
- remove "Map" parameter from interface
- move ":" from the (_ )
- fix labels and translations
- autodetect other systems only if lilo.conf does non exists
- join dialogs for linux and other sections:
- lilo-parser.sh/show_sections_list - returns all sections with "type" field
- lilo.in/list - returns all sections with "type" field
- modify extra-sections.scm
- change labels:
- View source -> Edit source
- Other -> Device
- Remove section existance test in lilo-parser.sh/create_section()
Now update_section rewrites all the existing section
- remove radiolists
- add /sbin/ paths to fdisk, sfdisk and lilo
- change Name in desktop-file
- changes in QT UI:
- remove Quit button
- change ru translation for Apply button
- remove password settings (qt only, not backend)
- rearrange gridboxes with text fields
- rearrange Apply/Reset buttons
- fix typo
- remove ALTLinux from labels
- fix translation
- use alterator-sh-functions
- add internal help
- build for Sisyphus and 4.0
- quick fix for extra options
- added X-Alterator-UI=qt
- Fix 'activity' in installer mode.
- Add 'compact' option in default lilo.conf .
- Add 'View source' mode to change lilo.conf directly.
- Add workaround for free cdrom.
- Ignore comments in the lilo.conf .
- Allow write lilo.conf without boot loader installation.
- Optimize image rename.
- Add packager.
- russian & ukrainian translations resurrected
- port fixes for automatic boot device recognition
- Fix reset global params.
- Add gfxboot support.
- Add kernel bootsplash support.
- Fix temp files.
- Initial release